apvf
发表于 2022-1-11 13:35:04
还有这个问题 从没注意过
jang
发表于 2022-1-11 14:12:13
1.交叉组合改成0之后會不自動扣除交叉部分
2.以下範例參考是否可達到你的需求
VUMM
发表于 2022-1-11 20:00:23
楼主发贴辛苦了,谢谢楼主分享!
huanglong116
发表于 2022-1-12 08:36:45
楼主发贴辛苦了,谢谢楼主分享!
oros
发表于 2022-1-12 15:33:12
Second, after I changed the cross combination to 0. I'll reply with a picture below. You can see that the inside and outside of the wall are the same length. In this way, the lengths on both sides of the inner and outer sides of the measurement are wrong.
s900297z
发表于 2022-2-7 22:40:24
其实我一直觉得楼主的品味不错!呵呵!
yuyucn
发表于 2022-2-19 07:04:32
楼主发贴辛苦了,谢谢楼主分享!
yuyucn
发表于 2022-2-24 07:03:36
楼主发贴辛苦了,谢谢楼主分享!
O...阳
发表于 2022-2-24 10:14:44
楼主发贴辛苦了,谢谢楼主分享!
abc01
发表于 2022-3-31 06:55:24
我看不错噢 谢谢楼主!