Cadimage Electrical FOR ARCHICAD 16 (WIN64&WIN32)

Electrical
http://www.cadimage.com/Products/Tools/Electrical

The Cadimage Electrical Tool is here to take the frustration out of creating Electrical Layouts in ArchiCAD, and to provide a much-needed injection of Speed!
The first thing you'll notice when placing your electrical symbols, is that there is no fiddly dragging and rotating required - you set the elevation you want when you place them, and they automatically rotate and position themselves to your walls after you click.
Making circuits is simple too - just select all the elements you want to wire up, and then with the click of one button, Cadimage Electrical automatically draws in the wiring for you. When you move elements that having wiring attached, the wiring will follow along, so there's no need to clean up your wiring as you change your Electrical Layout.
The Electrical tool comes with a library of Power Points, Switches, Jacks, and other Wall Plates, which can all be shown as either the Wall Plate itself, or the individual components which that Wall Plate contains.
Also included are a set of Templates for Electrical Schedules that you can import and modify to suit you. Scheduling is done by ArchiCAD's built-in Scheduler, so you won't need to learn anything new to get your schedules produced.

WIN32.rar(2.03MB)
程序下载：Cadimage Electrical for ac16.zip(18.73MB)

下来看看再说

tu版你来太可爱了，送这么好的礼物给大家。给我们找个河蟹版的吧,要求是高了点,但是硬着头皮开口要,呵呵{:soso__16984349925490629196_1:}

wu332 发表于 2012-11-23 11:16

                               
登录/注册后可看大图

tu版你来太可爱了，送这么好的礼物给大家。给我们找个河蟹版的吧,要求是高了点,但是硬着头皮开口要,呵呵{:s ...

附件啊！

{:soso__15314488721902909693_4:}好

TU版终于出现了。  {:soso__14026518335195840373_2:}

{:soso__8292921730758002966_1:}

tu8000 发表于 2012-11-23 12:33

                               
登录/注册后可看大图

附件啊！

我启动程序提示加载错误,打开可以看见插件,打开对话框是空的,又好像缺少图库吧.我的AC是和谐版的.

{:soso__5663373028670280397_3:}

下载下来学习学习。下载下来学习学习。